Tenda TEG1105P-4-63W 5-Port Gigabit desktop PoE switch (TEG1105P-4-63W)
description of
5xport, Metallic enclosure, 5xGigabit, PoE ports4, ManageabilityNot managed, PoE classPoE, Power63W The TEG1105P-4-63W is a Tenda PoE switch that offers 5*10/100/1000 Mbps Base-TX RJ45 ports. The 1-4 ports comply with IEEE 802.3af standard (maximum PoE output power: 15.4 W) and 802.3 standard (maximum PoE output power: 30 W). The switch offers a maximum PoE output of 58 W and is able to power access points, IP cameras and IP phones and exchange data with them via CAT5 cables. It also provides simple management modes, such as VLAN, to reduce cabling costs for IP terminals such as APs and IP cameras.Single-key VLAN
When "VLAN mode" is enabled, ports 1-4 will be disconnected but able to communicate with port 5. Hardware DIP switch can be used to isolate ports to prevent broadcast storm and protect against DHCP spoofing.6KV lightning protected PoE switch
AP or IP cameras are often installed outdoors or in a higher position, which also increases the risk of damage to the cameras and PoE switches from lightning strikes. As a result, equipment can be damaged or the entire local area network (LAN) can be paralysed. The Tenda TEF11 series switches feature a professional lightning protection design - the 6 kv port and power supply lightning protection - effectively keeps lightning strikes away from the cable, ensuring reliable system operation. The test standard is much higher than the national CE recommendation The system can provide local network coverage even in stormy weather, providing stable, reliable service and protecting data transmission.58W PoE power supply
Ports 1-4 comply with IEEE802.3af and IEEE802.3at power supply standards. The complete switch offers 58W maximum PoE output, while each port offers 30W maximum PoE power individually. The ports can be used to power and exchange data with APs and IP cameras.
Românesc 
Deutsch 
Slovenská 
Polski 
български 
Hrvatski 
