Românesc 
Deutsch 
Slovenská 
Polski 
български 
Hrvatski 
Brand:
Starter cable
Starter cable shopping:
Starter cable description of
Carguard 600A Jumper Cables: 3-meter long, reliable help on the road 🚗💨
This Carguard 600A jumper cable is a must-have for every car, so you can quickly and safely restart your vehicle in case of an unexpected battery drain. Thanks to its 3-meter length, it's convenient to use, even with larger vehicles.
Key Features:
- 600 AMP starting current: More than enough power to start most car batteries.
- 10 mm cable diameter: Durable, strong cables for long life.
- 3-meter length: Convenient distance for connecting between vehicles.
- Reinforced metal battery clamps: Secure and reliable connection.
- Rubber insulation: Reliably usable down to -35°C, you can count on it even in winter.
Safe Use:
- Always use standard jumper cables.
- Make sure that the nominal voltage of the two vehicles is the same (12-24V).
- Read the section on jump starting in your car's owner's manual.
- Turn off the ignition before connecting.
- The assisting vehicle's battery should have at least the same capacity as the drained battery.
- Keep the cables away from the drive belt and the cooling fan.
- Connect the red cable to the positive pole, and the black cable to the negative pole (or the engine block).
- After starting, let the engine run for 1-2 minutes before disconnecting the cables.
- Disconnect the cables in reverse order.
The Carguard 600A jumper cable is the perfect combination of reliability and safety. Don't leave home without it!
Article number: 55813
Starter cable reviews
Your review will help others!