Meross MS600 Smart WiFi motion sensor (Matter)

Information from

Meross MS600 WiFi smart presence detector (Matter)
The Meross MS600 is a reliable device that stands out for its exceptional accuracy in detecting presence and motion. Using dual detection technology - PIR sensor and millimetre-wave radar - it provides much higher accuracy than conventional sensors. The MS600 detects not only movement, but also the presence of the user, even when the user is not making any movement. Ideal for automating lighting, security systems and other smart home applications. Note: A gateway (not included) is required for the Matter protocol to work properly.


Dual sensing technology for maximum accuracy
The Meross sensor combines PIR technology with millimetre-wave radar for motion and presence detection. As a result, it effectively detects both motion and presence without movement, minimising the risk of false alarms caused by, for example, vacuum cleaners, wind or shadows. The built-in light sensor further enhances the ability to automate lighting, adapting it to the conditions in the room.


Support for multiple ecosystems
The Meross MS600 runs on the Matter platform, which allows for easy integration with HomeKit, Alexa, Google Home and Meross. This allows you to seamlessly manage the device from your system of choice, enjoying greater stability, lower latency and better data protection. Plus, with local support, the sensor can work offline.


Security and privacy
Unlike cameras, the Meross sensor does not record video or collect data about its surroundings, guaranteeing complete data protection. Using radar technology, it can detect even subtle movements without effects such as "ghosting" or other false detections. Moreover, while you are away, the sensor can trigger an alarm and send a notification to your phone in case of intrusion. So you'll always be in the picture.


Wide range and easy installation
The sensor has a 360° rotatable and 180° tiltable base, so you can adjust the detection angle precisely. Motion detection has a range of 12 metres and presence detection works effectively up to 6 metres. Integrated cable management solutions facilitate aesthetic installation.


Versatile application
The Meross MS600 works well in a wide range of situations: from home lighting automation and security systems to applications in garages, hotels and smart buildings. For example, you can turn on the fan if the sensor detects your presence in the bathroom for more than 5 minutes, or automatically turn off the air conditioner when you leave the bedroom.


Includes

sensor
power cable
power adapter
cable organizer x3
double-sided adhesive tape
animal protection cover
user manual






Manufacturer
Meross


Model
MS600


Input voltage
5V~, 1A


Radar frequency
24 GHz (ISM)


Port
USB-C


Gomb
Reset


LED
1x LED


Dimensions (width x height x height)
75.4 x 34.7 x 38.4 mm


Antenna
1x internal antenna


Wireless communication standards
IEEE 802.11 b/g/n, 2.4 GHz, 1T1R


Wireless network security
Supports 64/128-bit WEP, WPA-PSK/WPA2-PSK (does not support enterprise Wi-Fi).


Certificates
CE, FCC, IC, WEEE


System requirements
iOS 16.1 or later iOS, smartphone with Android 8.1 or later Android 8.1 operating system supporting Bluetooth 4.2 or later; 2.4GHz network.


Operating temperature
-10 ~ 45℃


Storage temperature
-40°C ~ 70°C


Operating humidity
20~95% RH


Storage humidity
5%~90% non-condensation