Milian Breath Monitor - PRO with 4 sensors - For Gemini

MILIAN PRO Twins new generation breath monitor and sleep monitor with 4 sensors
Modern, clean design.
Modern, high quality Hungarian product.

Movement and sleep monitor. Traditional number display can be used, but you can also set up a continuous graphical display (sleep monitor).
This gives you an insight into your baby's current sleep state, whether he is sleeping peacefully or if something is disturbing his sleep.
Using the graphical display can give parents extra important information that they might not have otherwise noticed.

If you are using it to monitor a baby, the 3 large sensor panels allow you to safely monitor the entire lying surface of a 60×140 cm cot. The sensor panels can be shared for multiple cots, the central unit can be easily detached and moved. If used in a baby cot, it must not come into contact with the adult bed, as adult movements can be transmitted!

When used with twin babies, a single unit monitors both babies, but babies must be placed in separate cots.
This model has a maximum of 2×2 sensor sheets, so there are 2 sensor sheets under a twin baby, giving better coverage (compared to 1 sensor sheet when 2 sensor sheets are connected to the device in total).

The MILIAN PRO Twin does everything you would expect from a state-of-the-art breath monitor and much more:

Basic functions:
- motion and breath monitoring, 12 seconds of audible alarm for breath failure (3 short beeps to try to get the baby to move more vigorously), 18 seconds of alarm
- displays the intensity of movement continuously (graphically) or every 3 seconds with a numerical value
- detects through the mattress, can be placed under any type of mattress

Extra safety features:
- warns if baby takes less than 10 breaths per minute
- Warns if baby breathes less than expected for more than 2.5 minutes

Special features:
- sleep monitor function, with continuous graphical display showing every movement of the baby
- twin function, no need to buy two devices (separate cot and at least 1 sensor sheet, 2 in total - but with this package you get double sensor sheets for both babies)

Useful features:
- 12 minutes of event memory: 12 minutes before alarm can be reviewed (6 plus 6 minutes in twin mode)
- variable number (1-4) of large sensor panels (30x50 cm) can be connected
- enhanced lateral sensitivity of sensor panels
- up to extra large monitored area, or split placement between several beds
- the central unit is fixed with a special strong Velcro fastener, but can be easily detached, making it easy to take the baby to another bed (e.g. grandma's if she already has the baby/babies bed with the right number of sensor panels)
- low power consumption: works for months on 2 pencil batteries
- reduced brightness, night mode

Smart features:
- intelligent battery voltage monitoring (signals battery change when baby is no longer asleep)
- detects environmental disturbances with adjustable detection threshold
- software solutions for safe detection
- on/off switching with or without audible safety alarm
- simple, one-button operation: after installation, only switch on and off during use, the rest is done by the device

- 5 years of support: the 3-year manufacturer's warranty starts after the expiry of the 1 year mandatory warranty (from purchase) and the 2 year warranty period (from purchase)
CE marking:
- The appliance complies with EU directives and regulations.